FireBall

Ultra-small Professional Dynamic Instrument Microphone

The FireBall™ dynamic instrument microphone is designed for harmonicas (both diatonic and chromatic) and beatbox. Clear, accurate, and capable of handling SPLs in excess of 140 dB without distortion, the FireBall™ is ideally suited for both live stage and studio recording applications.

The FireBall™ microphone has a smooth, uniform frequency response of 50 Hz – 16 kHz, and a cardioid pickup pattern for isolation and feedback control. It is lightweight, compact, and comfortable to hold. The FireBall™ is manufactured with a precision machined aluminum body, steel mesh grille, and a unique three-stage marbled anodized finish.

Because the FireBall™ cardioid instrument microphone is a low impedance microphone, when using with a guitar amplifier, a quality, low-high impedance transformer (see T50k)  is required.

Designed, machined, assembled, and tested by Audix in the USA.


3 Interest-Free Payments Available with
for orders $199 and up. Learn more
Where To Buy FireBall – Ultra-small Professional Dynamic Instrument Microphone
Transducer Type Dynamic
Frequency Response 50 Hz – 16 kHz
Polar Pattern Cardioid
Output Impedance 280 ohms
Sensitivity 1.5 mV / Pa @ 1k
Capsule Technology VLM Tyle B
Off-Axis Rejection >23 dB
Maximum SPL ≥140 dB
Power Requirements None
Connector 3-pin XLRm
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Materials / Finish Machined Aluminum / Anodized
Weight 128 g / 4.5 oz
Length 77.5 mm / 3.05 in
Download Spec Sheet

1x FireBall™ Instrument Microphone
1x DCLIP Microphone Clip
1x P1 Carrying Pouch

Capture.Share.

*Manufactured under licence